My car radio has arrived! My CitiCar does not have a radio. It was an option listed that people could pay extra for. Growing up, we had a large stereo in the dining room that could play 8-Track tapes and records. My dad also installed an 8-Track into his Gremlin. I figured I could go for a bit of nostalgia and hook one up to my car.

I started looking at a few websites and found a listing:

8-TRACK AM Vintage car audio RADIO original

Condition	Used
Price	$49.95
Brand	Katone Corporation
Manufacturer Part Number	CSI-22

There were a few photos that showed the controls, input plugs, and that it generally had some wear. I figured I could give it a shot. I went ahead and put in an order, and also put in an order for a car antenna as well. Although the car radio was advertised with AM, it could also play FM stereo.

Since I have sort of a miniature electronics workshop, I decided to wire it up to my bench power supply and try it out. It’s got a bit of an odd plug on the end of it. I started doing a bit of research, and found something similar called a 5 pin din plug connector. I couldn’t find an exact match on the pattern though.

I posted a photo to an electronics group, and I got the following responses when I asked what kind of DIN connector it was:

• Kodak slide projector
• M12 5 pin
• Not a DIN specs connector
• Commodore 64

Commodore 64 uses an 8 pin video socket, so that wouldn’t work out. The M12 5 pin has a cross-hair pattern, and wouldn’t fit. Someone recognized it was an old car audio connector and described what the pins were for. He had both a Kodak extension cable and the original plugs and took a photo of the two mating perfectly.

I found a listing for Remote Control Cable 5 Pin Male (Round/Kodak) Cutoff 5 Wires 22 Gauge 12 ft.for $5.99. These cables are used to control forward, reverse, and focus of Kodak and compatible projectors. So, I now have a Kodak slide projector cable on order for my car… yea.

On with the show. I started playing around with 12 volts. I quickly got it up and running. First, the box has a label that stating the covering was ground. Alligator clip to the frame… check. I found where the red wire was coming into the radio and tapped on it with the 12 volt positive. A light came on. Progress!

I grabbed my car antenna and plugged it into the antenna socket. I then stuck a few wires into the end of the radio plug and connected them to a speaker with alligator clips. I started up my little experiment again. First a buzzing sound. I started fiddling with some knobs and started to pick up an AM radio station talking about the president and his wife. Bingo! I’ve got me a working radio.

Unfortunately I don’t have any 8-Tracks to test the main feature of the little radio. The drive belt looks fine. I’ll have to wait a few days.